Elby Custom Services(http://elby.yolasite.com/)
Show expired deals


Deal Image Lee Enfield SMLE and Ishapore 2a1 Front Sight Adjusting Tool - Free Shipping! - $16.00 (Elby Custom Services)
Updated: 1/3/2018 (76 months ago)
This tool is designed to fit the Lee Enfield "SMLE" rifle, as well as the Ishapore 2a1. After removing the front sight protector, lay the tool on top of the sight with the front of the sight against the front of the slot in the tool. Handtighten the two push bolts in against the sight, then adjust as needed. The front of the sight tool has a notch machined out of it so that you can view the sight and target with the tool still mounted to the rifle. Like our other tools, these are machined out of 6061 Tempered aluminum bar stock that is manufactured here in Missouri. Our push bolts are sourced from a Nascar supply company, the ends are squared and polished to protect your sight from marring.
Current Deal
2016 views | Comments


Deal Image Lee Enfield #4 Front Sight Adjustment Tool Set - Free Shipping! - $18.00 (Elby Custom Services)
Updated: 1/2/2018 (76 months ago)
Set includes the sight adjusting tool, locking screwdriver, hex wrench and instructions.
Current Deal
1986 views | Comments


Deal Image Gunsmith model Mosin Nagant 1891/30 sight tool ***Free Shipping*** - $20.00 (Elby Custom Services)
Updated: 11/5/2015 (102 months ago)
For those who might use their tool a bit more frequently than most, or are concerned over the longevity of the .450" thick threaded aluminum push block found on the standard 91/30 tool. The Gunsmith model is machined from 1" thick 6061 aluminum and features a mild steel threaded insert in the block, pinned in place with two high-strength steel roll pins. The push bolt also has approximately 1/8" longer travel for front sight post removal.
Current Deal
2042 views | Comments


Deal Image Mosin Nagant M44 (1946 and Newer) and Chinese Type 53 Range Buddy front sight adjusting tool. ***Free Shipping!!*** - $16.00 (Elby Custom Services)
Updated: 10/30/2015 (102 months ago)
This tool is designed to adjust the front sights on the 1946 and newer Mosin-Nagant M44 carbine with the larger, U-shaped sight base. It also fits the Chinese Type 53 carbine, which shared the same design. Machined from 3/4" 6061 aluminum,bead-blasted satin finish.
Current Deal
2038 views | Comments


Deal Image M38 / 1943-45 M44/ WZ48 Range Buddy front sight adjusting tool ***Free Shipping!!*** - $16.00 (Elby Custom Services)
Updated: 10/30/2015 (102 months ago)
Front sight adjusting tool for the Mosin-Nagant M38 carbine. This tool also fits the 1943-45 M44 carbine and the WZ48 Polish .22 training rifle as well. Based on the same proven design as the orginal 91/30 tool. We offer the same warranty on this tool as well. Machined from 3/4" 6061 aluminum, individually fitted, bead-blasted satin finish.
Current Deal
2035 views | Comments


Deal Image Mosin-Nagant 1891/30 Range Buddy front sight adjustment tool ***Free Shipping*** - $16.00 (Elby Custom Services)
Updated: 10/29/2015 (102 months ago)
These are designed and fitted to 91/30 original front sight posts, the tool will work on other rifles as well as long as the barrel diameter does not exceed 5/8'' measured 1" rearward of the sight post, and the push bolt lines up with the post.
Current Deal
2014 views | Comments



Last Deal Update:
10 hours ago

Username:
Password:
Remember Me
(forgot user/pass)
(register)
Lucky Gunner
Ammunition Depot
Foundry Outdoors
EMac's Tactical and Survival Shop

Announcements

New to the site? Check out the FAQ to see how it works.